Need to format your USB all through the command prompt? It’s a pretty advanced way, but I’ll show you exactly how to!

Support & Follow Me On Facebook:
Support & Follow Me On Twitter:
My Official Website:

1. Open up cmd from the start menu
2. Type compmgmt.msc to open your computer management tool and locate the disk (Number)
3. Once you have the disk number, remember it, then pull command prompt back up and type in: diskpart
4. Type: list disk
5. Then after remembering what number your disk was, change the # sign to the number and type: select disk (Number)
6. Then type: clean
8. Then Type: create partition primary
9. Then type: active
10. Finally type: format fs= fat32 (OR NTFS)

Difference: FAT32 (File Allocation Table) is older, and more compatible with all file types and systems, but only transfers up to 4gig files
NTFS (New Technology Files System) allows for files above 4gigs, but is unable to be formatted, doens’t work with all operating systems like MACS

Nguồn: https://haitivolunteer.org

Xem thêm bài viết khác: https://haitivolunteer.org/tong-hop/

42 Comments

  • CyberPunk
    Posted May 29, 2020 6:53 am

    Are you having problems when you go to "Clean" the device in CMD Prompt? Or is this method not working for you? I made another video that takes different steps when reaching that part. Check it out here: https://youtu.be/beDLlMWK8VQ

  • Fahad Sulaiman
    Posted May 29, 2020 6:53 am

    If I just format it by right click with selecting FAT32/NTFS that would be ok.

  • Cupcake
    Posted May 29, 2020 6:53 am

    i have the volume is too big and i dont know whats happening can you help me

  • Adi Admir
    Posted May 29, 2020 6:53 am

    I learned something so thank you.

  • Λαυρέντιος Ψαροκάηκας
    Posted May 29, 2020 6:53 am

    A question, if i may. I tried to fast format my usb.. took a lot of time. I then decided to do it normally. I forgot about it, i interrupted that format,took the usb out, when i put the usb in again, it makes a recognition sound, but it does not actually recognize it. I cannot format it nor enter the usb. hat shall i do? I think my usb is damaged beyond repair..

  • Λαυρέντιος Ψαροκάηκας
    Posted May 29, 2020 6:53 am

    A question, if i may. I tried to fast format my usb.. took a lot of time. I then decided to do it normally. I forgot about it, i interrupted that format,took the usb out, when i put the usb in again, it makes a recognition sound, but it does not actually recognize it. I cannot format it nor enter the usb. hat shall i do? I think my usb is damaged beyond repair..

  • Daniel John Catudio
    Posted May 29, 2020 6:53 am

    CyberPunk can I ask your help about my USB/flash drive? I'm fixing this for the whole night but nothing is happening. Here is the situation,,, I don't know what happened to my flash drive, but from 8GB size, it is only now 8MB. And when I tried to open my Flash Drive, I cannot open it. I tried to delete the partition in Disk Management and shrink it again the size of my flash drive is still 8MB and I can't still open it, I tried to format it as well, but it won't let me format the Drive. And I tried to do the same thing as what you have shown in this video but after formatting, it says that "Virtual Disk Error: The volume size is too small." And my Flash Drive is in the RAW File system. Please help me solve my problem. I'm begging you, Sir.

  • Kurt Francis
    Posted May 29, 2020 6:53 am

    format fs=- fat32 says not valid

  • Wanda Rooks
    Posted May 29, 2020 6:53 am

    Fat32 is not supported for the selected volume ( sandisk) brand?????

  • Ted Levett
    Posted May 29, 2020 6:53 am

    Hi there, I have followed your instruction to the letter but @format stage I get

    0% completed, Virtual Disk Service Error, The Media is write protected.
    I have tried other ways to override write protection but to no avail.
    In computer management @ Disk 2 removable it says 29.30GB Read Only

    I'd be grateful for your help.
    Many thanks
    Ted

  • Eric Curry
    Posted May 29, 2020 6:53 am

    thank you for making that painless. shit

  • Gladys Ma
    Posted May 29, 2020 6:53 am

    Thank you very much. Following your precise and concise demo I have successfully reformatted a RAW usb to FAT32. Among many videos claiming fixing such, yours is the best I found.

  • SoKal Sophia
    Posted May 29, 2020 6:53 am

    Thank you! I was able to do it but, you were going a 100 miles an hr!!!! Sloooooow down, thank you

  • ABK.1221
    Posted May 29, 2020 6:53 am

    omg my flashdrive not support ntfs how was that

  • Stevie Wonders
    Posted May 29, 2020 6:53 am

    Thank you so much this helps

  • Springtrap
    Posted May 29, 2020 6:53 am

    Thanks man (y)

  • Toma Hawk
    Posted May 29, 2020 6:53 am

    CyberPunk … You are a Genius! Thank You So Much for the Tutorial! 🌷

  • kerwin john villasin
    Posted May 29, 2020 6:53 am

    Thanks!!!

  • Sick 'N Twisted
    Posted May 29, 2020 6:53 am

    Hey, i truly enjoy your videos. Question, i have an external hard drive. I want to recover the data that's on it. How do i go about doing that?

  • Alecxis Epan
    Posted May 29, 2020 6:53 am

    What to do when it says "No Media" instead of "Online"

  • meme-sama!
    Posted May 29, 2020 6:53 am

    DISKPART> create partition primary

    No usable free extent could be found. It may be that there is insufficient

    free space to create a partition at the specified size and offset. Specify

    different size and offset values or don't specify either to create the

    maximum sized partition. It may be that the disk is partitioned using the MBR disk

    partitioning format and the disk contains either 4 primary partitions, (no

    more partitions may be created), or 3 primary partitions and one extended

    partition, (only logical drives may be created).
    help!

  • saiko
    Posted May 29, 2020 6:53 am

    Your a god

  • PhireXD
    Posted May 29, 2020 6:53 am

    it says there is not enough usable space for this operation

  • Swaraj Dey
    Posted May 29, 2020 6:53 am

    Thank you so very much!

  • Hammad Ullah
    Posted May 29, 2020 6:53 am

    when i am type clean disk is not clean and when i am type create partition primary then show partition not created how can i fix it?

  • Athul Sunil
    Posted May 29, 2020 6:53 am

    Can I repair corrupted usb using this method

  • El Haithem
    Posted May 29, 2020 6:53 am

    keep it high …good video bro keep going..like sub and resp……realy helped me

  • المعلم تاكيشي El Mo3alim Takishi l
    Posted May 29, 2020 6:53 am

    i want downgrade from windows 10 to windows 7 i download it with 3 gb what i chose NTFS or Fat32??
    answer asap

  • Maher Adnan
    Posted May 29, 2020 6:53 am

    DiskPart has encountered an error: The device is not ready.
    See the System Event Log for more information.''
    It has shown in 'cmd'..What can I do now?..pls mail me here' maheradnan.t@gmail.com'

  • Maher Adnan
    Posted May 29, 2020 6:53 am

    cleaning is not working.Showing error..

  • Sir XtC
    Posted May 29, 2020 6:53 am

    error: access denied
    i was trying to create a windows 10 media tool. but it gave me the error and messed up the usb stick. i followed both this and the video before this one. and none worked :c maybe because it has an OS in the USB ??

  • Get to Da Choppa
    Posted May 29, 2020 6:53 am

    Disk management can be accessed by right clicking on my computer then choose manage.
    The dialog box locks up with the disk inserted in the USB port.
    Virtual disk service error:
    There is no media in the device.
    This is all good for disks with a minor issue however nothing further.

  • 就这样
    Posted May 29, 2020 6:53 am

    Thank you so much.I first time face the problem like this.Thank for your video❤❤❤

  • Arun 1234567
    Posted May 29, 2020 6:53 am

    the clean command not work

  • Donatas Koreiva
    Posted May 29, 2020 6:53 am

    Great video bro! Thanks a lot!

  • Muhammad Kashif Ashraf
    Posted May 29, 2020 6:53 am

    thanks cyberpunk….u solved my problem

  • InfMotion
    Posted May 29, 2020 6:53 am

    Thanks, it WORKS !!! yeahhh 😀

  • Esaivanan Ashokkumar
    Posted May 29, 2020 6:53 am

    after 99% i found error that is DiskPart has encountered an error: The parameter is incorrect. See the System Event Log for more information

  • Abstinent Massioü
    Posted May 29, 2020 6:53 am

    Why does it take too long to load for format? It only moves a percent for 10 or more minutes.

  • Antpony
    Posted May 29, 2020 6:53 am

    THaNK YOU SOOOOOO MUCH i did this o record on xbox for one hour and upload to my youtube channel it helped so much you have earned my sub and keep up the videos!

  • Kennedy G
    Posted May 29, 2020 6:53 am

    OMG SUCH A HELP! Ty sm!!!!!

  • alien
    Posted May 29, 2020 6:53 am

    Dude fuk u now my USB not working… When i plug-in it doesnt even show, disliked

Leave a comment